Breezair Direct Drive Icon Motor 1100W

This Breezair Direct Drive Icon Motor is a straightforward replacement for 1100W units in compatible Breezair evaporative coolers, getting your system back to proper operation fast. It's the core component that moves air, essential for keeping those Australian summers manageable.

Anyone who's been up on a hot roof knows you want a reliable motor that bolts straight in without a fuss. This unit is designed to meet those expectations, ensuring consistent airflow and efficient cooling.

Best For

• HVAC service technicians maintaining Breezair evaporative cooling systems.
• Refrigeration apprentices learning evaporative cooler repair.
• Competent DIY homeowners replacing a worn-out motor in their own Breezair unit.

Compatibility

This 1100W direct drive motor is specifically designed to suit Breezair evaporative cooling units. It's listed under Seeley Part Number 095950. If you're running a different model, check fittings and specs before ordering.

Features

• Direct drive design for efficient and reliable air movement.
• Rated at 1100 Watts, matching original equipment specifications.
• Genuine replacement component for Breezair evaporative coolers.
• Designed for a direct fit, simplifying the replacement process.

Technical Specifications

What's in the Box

• 1x Breezair Direct Drive Icon Motor 1100W (SY095950)

Using It on the Job

1. Isolate Power: Always begin by switching off the main power to the evaporative cooler at the circuit breaker or isolation switch. Verify with a voltage tester before proceeding.
2. Access Motor: Remove the cooler's cabinet panels and any fan shrouds to gain full access to the existing motor.
3. Disconnect & Remove: Carefully disconnect all electrical wiring from the old motor, noting the connection points or taking photos. Unbolt the motor from its mounting points and remove it, taking care with its weight.
4. Install New Motor: Mount the new 1100W Breezair motor, ensuring it's securely bolted in place. Reconnect all electrical wiring, double-checking against your notes or photos.
5. Test & Reassemble: Restore power and conduct a test run to ensure the fan operates smoothly and quietly. Once confirmed, reassemble all panels and shrouds.

Limitations & Safety Notes

• Always isolate and lock out power before commencing any electrical work on cooling units.
• Only install this motor in compatible Breezair units with matching wattage requirements.
• Ensure all electrical connections are clean, secure, and properly insulated upon reassembly.
• Follow all relevant Australian electrical safety standards and Safe Work practices.

When swapping out a motor on the roof, especially in summer, make sure all your tools are secured. Losing a spanner off the side of the roof is a bad way to finish the job. Also, check the fan blade for balance and cleanliness while you have everything open; it saves a call-back.

Pair With

Pair this Breezair motor with replacement evaporative cooler filter pads and a new evaporative cooler pump to give the entire system a thorough service. Consider checking the main control board for any signs of wear too.