Braemar WF2000 Evaporative Cooler Fan Blade 200mm

This Braemar WF2000 fan blade is a direct replacement for your evaporative cooler, designed to restore proper airflow and cooling efficiency. It’s essential for any tech or competent owner tackling a noisy or inefficient cooler during the hot Australian summer.

Anyone who's battled an Australian summer knows a faulty evaporative cooler fan blade can turn a working unit into an expensive paperweight. Swapping out a damaged blade can make a massive difference to comfort levels and energy use.

Best For

• HVAC technicians performing evaporative cooler service.
• Maintenance teams managing commercial evaporative cooling units.
• Competent DIY homeowners replacing parts on their Braemar WF2000.

Compatibility

This fan blade is specifically made for Braemar WF2000 evaporative cooler models. It's a genuine replacement part, ensuring a precise fit and reliable operation. If you're running a different model, check fittings and specs before ordering.

Features

• Genuine Braemar Part: Ensures compatibility and performance as per original manufacturer specifications.
• 200mm Diameter: Matches the factory-fitted blade for the WF2000 model.
• Restores Airflow: Helps bring your evaporative cooler back to optimal cooling capacity.

Technical Specifications

What's in the Box

• 1 x Braemar WF2000 Fan Blade (SY612072)

Using It on the Job

1. Isolate Power: Always shut off mains power to the evaporative cooler at the circuit breaker and verify with a multimeter before touching any components.
2. Access Fan Assembly: Carefully remove the cooler's outer casing and any protective grilles to expose the fan motor and blade assembly.
3. Remove Old Blade: Loosen the set screw or bolt securing the old fan blade to the motor shaft. Note any washers or spacers for reassembly.
4. Install New Blade: Slide the new Braemar WF2000 fan blade onto the motor shaft, ensuring it's oriented correctly and fully seated. Tighten the set screw securely.
5. Inspect & Test: Manually spin the fan blade to check for any obstructions or wobbles. Reassemble the cooler, restore power, and test for proper operation and airflow.

Limitations & Safety Notes

• Always ensure power is isolated before working on electrical components.
• This fan blade is only for use with Braemar WF2000 evaporative cooler models.
• Handle fan blades with care to avoid damage during installation.
• Follow manufacturer instructions for your specific Braemar unit when replacing parts.

Tradie Pro Tip: When you're replacing a fan blade, it's a good time to check the fan motor for any bearing noise or excessive play. A wobbly motor shaft can quickly ruin a new blade. Also, give the fan housing a good clean while it's open.

Pair With

Consider pairing this fan blade with other Evaporative Cooler Spares like new filter pads or a replacement pump to give your unit a full overhaul. A set of basic hand tools for evaporative cooler service will also come in handy.