Braemar THM 618 PCB Circuit Board for BSC 2006 Zone Control Heaters

This is a genuine replacement Printed Circuit Board (PCB) for Braemar THM 618 ducted gas heaters. It's crucial for getting your customer's heating system back online, especially when zone control faults are popping up. After troubleshooting countless board issues, I know a genuine replacement is key to a lasting fix.

Keeping ducted heaters running smoothly during the cooler months is a top priority across Australian homes. This board ensures your Braemar unit communicates correctly, managing temperature and zone distribution as designed.

Best For

• HVAC service technicians troubleshooting Braemar ducted heaters.
• Refrigeration apprentices learning fault diagnosis on gas appliances.
• Competent DIY owners maintaining their Braemar THM 618 unit.

Compatibility

This Braemar PCB (Part Number 628592) is specifically designed for the Braemar THM 618 model ducted gas heater with BSC 2006 Zone Control. It ensures proper communication and operation within the zone control system.

If you're running a different model, such as the THM 516, THM 520, THM 623, THM 530, or THM 632, check your existing board's part number against the manufacturer's documentation before ordering to ensure correct fitment.

Features

• Genuine Braemar Part: Ensures direct fit and reliable performance as per manufacturer specifications.
• Model Specific: Designed precisely for Braemar THM 618 ducted gas heaters.
• Zone Control Integration: Essential component for the BSC 2006 zone control system, enabling proper temperature regulation across different zones.
• Direct Replacement: Ready to install, helping minimise downtime on critical heating systems.

Technical Specifications

What's in the Box

• 1 x Braemar THM 618 PCB Circuit Board (PN. 628592)

Using It on the Job

1. Isolate Power: Always disconnect the main power supply to the ducted heater at the switchboard before beginning any work. Use lockout/tagout procedures if available.
2. Access Panel: Remove the heater's access panel to expose the control board enclosure.
3. Photograph Connections: Before disconnecting, take clear photos of all wiring connections to the existing PCB. This helps immensely during reassembly.
4. Remove Old Board: Carefully disconnect all wiring and mounting screws holding the old PCB in place.
5. Install New Board: Mount the new Braemar THM 618 PCB, ensuring it's correctly seated. Reconnect wiring exactly as per your photos.
6. Test Functionality: Restore power and run through the heater's cycle, checking for proper ignition, fan operation, and zone control functionality.

Limitations & Safety Notes

• Installation of gas appliance parts must be performed by a qualified and licensed gas fitter or HVAC technician.
• This PCB is specific to the Braemar THM 618 model and BSC 2006 zone control. Do not attempt to fit it to incompatible units.
• Always follow manufacturer's installation guidelines and relevant Australian safety standards.
• Electronic components are sensitive to static discharge; handle with care.

Tradie Pro Tip

Before pulling the old board, always double-check the model number on the heater itself and the part number on the PCB. A quick cross-reference can save you a return trip and a lot of headaches, especially with sensitive electronic parts.

Pair With

Consider pairing this replacement PCB with new flame sensors or igniters if your unit is showing intermittent ignition faults. A good multimeter and a set of insulated hand tools are also essential for safe and effective troubleshooting.