Bonaire Vulcan Gas Heater Combustion Fan

When your Bonaire Vulcan gas heater needs a new combustion fan, this internal EBM unit, part number CTSPS5310801SP, is the right replacement. It helps keep your heater running efficiently and safely, pushing flue gases out reliably.

A reliable combustion fan is crucial, especially during those cold Australian winter mornings when you need your heater to fire up without a hitch. Getting the combustion right means a safer and more efficient heater.

Best For

HVAC techs, licensed gasfitters, and competent DIY owners maintaining Bonaire Vulcan gas heaters.

Compatibility

This combustion fan is specifically designed for internal Bonaire Vulcan gas heater models. It features a round outlet for direct fitment. Always cross-reference the part number (Bonaire PN 5310801SP) to confirm compatibility before installation. If you're running a different model, check fittings and specs before ordering.

Features

• Direct replacement for Bonaire PN 5310801SP.
• Designed for internal Bonaire Vulcan gas heater models.
• Features a round outlet for a seamless fit.
• Ensures proper exhaust of combustion by-products.

What's in the Box

• 1 x Bonaire Vulcan Gas Heater Internal EBM Combustion Fan (Part: CTSPS5310801SP)

Using It on the Job

1. Before starting any work, ensure the gas supply and electrical power to the heater are completely isolated and locked out.
2. Carefully access the existing combustion fan. Note its orientation and connections.
3. Disconnect the wiring and remove any fasteners holding the old fan in place.
4. Install the new CTSPS5310801SP fan, ensuring the round outlet aligns correctly and all fasteners are secured.
5. Reconnect the electrical wiring, making sure connections are tight and correct.
6. Once installed, restore power and gas, then test the heater's operation for proper combustion and flue gas exhaust.

Limitations & Safety Notes

• Gas appliance work should only be performed by a licensed gasfitter or qualified technician.
• Always isolate electrical and gas supplies before servicing.
• Ensure correct wiring and gas connections are made to prevent hazards.
• Not for use on models other than internal Bonaire Vulcan gas heaters with part number 5310801SP.
• Follow all Australian standards and manufacturer guidelines for installation and servicing.

Tradie Pro Tip

Before you pull the old fan out, take a quick photo of the wiring connections. It's a simple step that saves a heap of head-scratching when you're hooking up the new one, especially if the schematics aren't handy.

Pair With

Pair with Bonaire control boards and a quality gas pressure switch for complete system maintenance.