Bonaire Integra VSS 55|50 FILCEL Evaporative Cooler Pads 100mm

These Bonaire Integra VSS 55|50 FILCEL Evaporative Cooler Pads are the real deal for keeping your Bonaire cooler running clean and efficient. They're essential for HVAC techs, maintenance teams, and diligent homeowners looking to maintain their evaporative cooling systems properly.

Living through an Australian summer with dirty, mouldy cooler pads isn't just uncomfortable; it's unhealthy and makes the unit work harder than it should. Swapping out old pads means fresh, clean air and lower running costs.

Best For

• Routine service and maintenance of Bonaire Integra VSS 55|50 evaporative coolers.
• Seasonal pad replacement before the summer heat hits.
• Ensuring healthy, clean air delivery in residential or light commercial settings.

Compatibility

These FILCEL™ pads are made to suit Bonaire Integra VSS 55|50 models with the small cabinet size, measuring 755mm x 378mm x 100mm thick. They come ready to install with the necessary fixing pins and water distribution panels.

If you're running a different model, check fittings and specs before ordering.

Features

• Genuine FILCEL™ pads, designed and made in Australia by Filtex Filters™.
• Pads are antibacterially pre-treated to inhibit growth.
• Includes a separate antibacterial tank treatment, effective against 99% of airborne germs, viruses, bacteria, mould, fungus, and spores.
• Supplied as a 4-pack, complete with fixing pins and washers for a straightforward installation.
• Includes standard, rebated, or channel water distribution panels as required for your model.

Technical Specifications

What's in the Box

• 1 x 4 Pack of Bonaire FILCEL™ Filter Pads (755 x 378 x 100mm)
• Fixing pins & washers
• Separate antibacterial tank treatment
• Standard, rebated, or channel water distribution panels (as specified by model)

Using It on the Job

1. Isolate power to the evaporative cooler at the switchboard. Always tag out and lock out if possible.
2. Access the pad cabinet by removing the appropriate panels, following the manufacturer's instructions for your Integra VSS 55|50 model.
3. Carefully remove old, dirty pads and any accumulated debris. Give the pad cabinet, water reservoir, and distribution channels a thorough clean.
4. Install the new FILCEL™ pads, ensuring they sit correctly within their frames and using the supplied fixing pins and washers to secure them.
5. Add the separate antibacterial tank treatment to the cooler's water reservoir as directed on the packaging.
6. Replace all access panels, restore power, and test the cooler's operation to confirm proper function and airflow.

Limitations & Safety Notes

• These pads are designed only for Bonaire Integra VSS 55|50 evaporative cooler models with the 100mm thick, small cabinet size.
• Always ensure power is isolated and locked out before performing any maintenance on an evaporative cooler.
• Follow all manufacturer's installation guidelines for your specific cooler model to ensure optimal performance and safety.
• Use appropriate Personal Protective Equipment (PPE) during maintenance, especially when handling old, mouldy components or cleaning chemicals.

Don't just swap the pads. Take the time to clean out the water reservoir, pump, and distribution channels while you're in there. A clean system runs more efficiently and extends the life of your new pads, delivering better air quality for your clients.

Pair With

Pair with a good quality cooler cleaning solution and a stiff brush for thorough cabinet and water reservoir cleaning. Consider a new cooler pump if your existing one is showing signs of wear.