Bonaire Evaporative Cooler Filter Pads (Set of 4)

This set of four Bonaire evaporative cooler filter pads (Bonaire PN 6050415SP) is built to spec for a range of Bonaire VSL, SBL, and BBM units. They're essential for keeping your evaporative cooler delivering fresh, clean air, especially during those long Australian summer stretches.

Properly maintained filter pads are key to efficient cooling and preventing dust build-up in your system's ductwork. After years on the tools, I've seen firsthand how blocked or worn pads can tank a cooler's performance and send power bills through the roof.

Best For

Evaporative cooler service and maintenance, competent DIY owners replacing worn pads, ensuring optimal airflow and cooling efficiency.

Compatibility

These filter pads are specifically designed for Bonaire evaporative cooler models:

• VSL70
• VSL75
• VSL75HD
• VSL75/70
• SBL70
• SBL75
• BBM1250

If you're running a different model, check fittings and specs before ordering.

Features

• Direct Replacement: Engineered to original Bonaire specifications (PN 6050415SP) for a perfect fit.
• Optimal Filtration: Designed to efficiently filter airborne particles, ensuring cleaner air delivery.
• Enhanced Cooling: Maintains proper water distribution and airflow, crucial for evaporative cooling performance.
• Durable Construction: Built to withstand continuous use in Australian climate conditions.
• Complete Set: Includes four pads, enough for a full system replacement.

Technical Specifications

What's in the Box

• 4 x Bonaire Evaporative Cooler Filter Pads, each measuring 755mm x 741mm x 85mm.

Using It on the Job

1. Power Isolation: Always isolate and lockout power to the evaporative cooler at the mains before starting work. Safety first.
2. Access Pads: Carefully remove the cooler's covers or panels to access the old filter pads.
3. Remove Old Pads: Take out the old, worn filter pads, noting their orientation for replacement.
4. Install New Pads: Fit the new Bonaire filter pads, ensuring they seat correctly for optimal water flow and air filtration.
5. Reassemble: Securely reattach all covers and panels. Restore power and test the cooler's operation.
6. Check Performance: Verify airflow, cooling efficiency, and look for any leaks or unusual noises after replacement.

Limitations & Safety Notes

• These pads are designed for Bonaire evaporative coolers only, as listed under compatibility.
• Always ensure power is isolated before accessing internal components of an evaporative cooler.
• Regular inspection and cleaning of the cooler's water tray and pump are recommended during pad replacement.
• Dispose of old filter pads responsibly according to local guidelines.

Tradie Pro Tip

When you're swapping out these pads, it's a prime opportunity to give the entire cooler, especially the water tray and pump, a good clean. A bit of anti-microbial treatment in the water after startup can also help keep things fresh and stop mould growth, which is common in humid Australian conditions.

Pair With

Pair with evaporative cooler cleaning solutions and replacement pumps from our HVAC Shop range to give your system a full service.