This Seeley Motor and Fan Assembly is your go-to replacement part for getting evaporative coolers back in action. It's a critical component for restoring proper airflow and cooling performance when an old motor gives up the ghost.
Anyone who's been up on a scorching hot roof in summer knows a seized fan motor can bring an evaporative cooler to a grinding halt, leaving your clients in the heat. This 315 Watt, 9x7 inch blower assembly helps you make that swap efficiently.
Best For
- HVAC service technicians replacing worn-out evaporative cooler motors.
- Building maintenance teams managing commercial or residential evaporative cooling systems.
- Competent DIY owners maintaining their own Seeley evaporative coolers.
Compatibility
This 315 Watt motor and 9x7 inch blower assembly is designed as a direct replacement part for specific Seeley brand evaporative coolers. While exact model numbers aren't specified in the available data, the 315W power rating and 9x7 blower dimensions are key identifiers.
If you're running a different model or brand, always physically check the wattage, motor type, and blower wheel dimensions against your existing unit before ordering to ensure a perfect fit.
Features
- Direct Replacement: Engineered to match original Seeley specifications for straightforward installation.
- Integrated Design: Comes as a complete motor and fan assembly, simplifying the replacement process.
- Robust Performance: 315 Watt motor provides reliable power for consistent airflow in evaporative cooling systems.
- Optimised Airflow: Features a 9x7 inch blower wheel, ensuring efficient air movement for effective cooling.
Technical Specifications
| Specification | Detail |
|---|---|
| Wattage | 315 Watt |
| Blower Wheel Size | 9x7 inch |
| Type | Motor and Fan Assembly |
What's in the Box
- 1 x Seeley Motor and Fan Assembly 315 Watt 9x7 Blower
Using It on the Job
- Isolate Power: Before any work, ensure the evaporative cooler's power supply is fully isolated at the mains and locked out. Confirm zero voltage with a reputable electrical tester.
- Access and Remove: Carefully open the cooler unit and disconnect any wiring from the old motor. Note wire colours and connections. Unbolt and remove the faulty motor and fan assembly.
- Install New Assembly: Position the new Seeley assembly, ensuring correct alignment. Secure all mounting bolts tightly. Connect wiring as per the manufacturer's diagram, matching terminals exactly.
- Inspect and Secure: Double-check all electrical connections for tightness and proper insulation. Ensure the blower wheel spins freely without obstruction. Close up the cooler unit securely.
- Test Operation: Restore power to the unit. Run the cooler through its various fan speeds and modes to confirm the new motor and fan assembly is operating smoothly and quietly, providing adequate airflow.
Limitations & Safety Notes
- This assembly is an electrical component; installation should only be performed by a qualified tradesperson or competent person familiar with electrical safety procedures.
- Always verify the specific wattage and physical dimensions (blower wheel size) against your existing evaporative cooler part before purchase.
- Ensure power is isolated and verified dead before commencing any work on the unit to prevent electric shock.
- Follow all Australian electrical safety standards and Safe Work guidance during installation.
Tradie Pro Tip: When replacing blower assemblies, always check the condition of the motor's run capacitor. A failing capacitor can cause a new motor to draw excessive current or not start, mimicking a motor fault. It's often good practice to replace it at the same time.
Pair With
This Seeley Motor and Fan Assembly pairs well with electrical multimeters for testing, evaporative cooler spare parts, and general HVAC tools for maintenance and repair.