This genuine Seeley International 430W motor is a direct replacement part, designed to get your evaporative cooler back up and running without fuss. It's built for reliability, helping service techs and maintenance teams keep their clients cool during those long Australian summers.
Anyone who's tackled a hot evaporative cooler motor replacement on an Aussie rooftop knows the value of having the right part ready to go. This motor comes with the collet and capacitor, saving you time sourcing extra bits.
Best For
- Evaporative cooler service and maintenance technicians
- HVAC apprentices learning cooler repairs
- Competent DIY owners replacing motors in compatible Seeley models
Compatibility
This 430-watt motor (SY095691) with a 5/8" shaft is specifically designed for the following Seeley International evaporative cooler models:
- LCB350
- LCQ350
- LCS 380
- CPS700
- CPQ700
If you're running a different model, check fittings and specs before ordering to ensure it’s the correct replacement.
Features
- Direct Replacement: Manufactured to fit specified Seeley International evaporative cooler models.
- Integrated Components: Comes complete with the necessary collet and capacitor for a quicker swap.
- Standard Shaft Size: Features a 5/8-inch shaft, matching original equipment specifications.
- Reliable Power: Rated at 430 watts, providing adequate power for cooler operation.
Technical Specifications
| Specification | Detail |
|---|---|
| Power Output | 430 Watts |
| Shaft Diameter | 5/8 inches |
What's in the Box
- 1 x Seeley International 430W Motor
- 1 x Motor Collet
- 1 x Motor Capacitor
Using It on the Job
- Isolate Power: Always disconnect and lock out power to the evaporative cooler before starting any work. Safety first.
- Access and Disconnect: Carefully remove access panels. Document or label wiring connections before disconnecting the old motor.
- Remove Old Motor: Unbolt or unclamp the old motor, noting any specific mounting hardware or alignment.
- Install New Motor: Mount the new 430W motor, ensuring the shaft is correctly aligned and secure. Attach the collet and connect the capacitor.
- Wire Up: Reconnect wiring securely, double-checking against your labels or the cooler's wiring diagram.
- Test: Restore power and test the cooler's operation, checking for smooth motor rotation and proper airflow before re-securing panels.
Limitations & Safety Notes
- This motor is for specified Seeley International evaporative cooler models only; verify compatibility.
- Always isolate and lock out electrical power before commencing any work on the cooler's electrical components.
- Motor replacement involves electrical connections; ensure work is performed by a qualified tradesperson or competent individual.
- Follow all Australian electrical safety standards and Safe Work guidance during installation.
Tradie Pro Tip
Before you even unbolt the old motor, take a few photos of the wiring connections. It'll save you a headache when you're hooking up the new one, especially if the wiring colours aren't quite what you expect.
Pair With
Pair this motor with a new set of evaporative cooler pads and a replacement water pump to give that old cooler a full refresh. You might also need some electrical connectors and heat shrink for tidy wiring.