These Seeley filter pads are crucial for maintaining the efficiency and air quality of your Braemar evaporative cooler. Designed as a direct replacement, they ensure your system can pull in air, filter out dust and debris, and deliver cool, fresh air without extra strain on the fan motor.
During an Australian summer, a clogged filter pad means poor airflow and less effective cooling, so having clean, correctly sized pads is non-negotiable for keeping your customers comfortable.
Best For
- HVAC service and maintenance teams
- Evaporative cooler installers
- Competent DIY homeowners maintaining Braemar units
- Facilities managers responsible for commercial evaporative cooling systems
Compatibility
This large Seeley filter pad is a direct fit for a range of Braemar evaporative cooler models. Specifically, it suits the following:
- LCA450, LCA550
- LCQI450, LCQI550
- BMQ650, BMQ850, BMQ1150
- LCQ450, LCQ550
- LCB450, LCB550
- BM900, BM1150
- CVP950, CVP100
- CPL850, CPL1100
- CPS850, CPS1100
- CPQ850, CPQ1100
If you're running a different model, check fittings and specs before ordering.
Features
- Exact Fit Dimensions: Engineered to match Braemar specifications for optimal airflow and cooling performance.
- Efficient Filtration: Helps prevent dust, pollen, and other airborne particles from entering the cooled space and clogging internal components.
- Genuine Seeley Part: Identified by Seeley PN 114606, ensuring compatibility and quality standard.
- Improved Air Quality: Contributes to cleaner air by effectively filtering the incoming air stream.
Technical Specifications
| Specification | Detail |
|---|---|
| Dimensions (LxWxD) | 847mm x 526mm x 90mm |
| Part Number | SY114606 / Seeley PN 114606 |
| Suits Models | LCA, LCB, LCQ, BMQ, CVP, CPL, CPS, CPQ Series |
What's in the Box
- 1 x Seeley Filter Pad, Large (847x526x90mm)
Using It on the Job
- Isolate Power: Always disconnect power to the evaporative cooler at the mains before starting any work.
- Access Pads: Follow manufacturer instructions to remove the cooler's outer panels and access the old filter pads.
- Inspect & Clean: While pads are out, clean the water distribution tray and check the pump for any blockages.
- Install New Pad: Carefully position the new Seeley filter pad, ensuring it sits correctly within its frame to prevent bypass air.
- Reassemble & Test: Secure panels, restore power, and run the cooler to check for proper water flow and efficient cooling.
- Final Check: Confirm there are no water leaks and that the fan is running smoothly.
Limitations & Safety Notes
- This filter pad is designed for specific Braemar evaporative cooler models only; verify compatibility before purchase.
- Always ensure power is isolated before working on any evaporative cooler or electrical components.
- Regular maintenance, including pad replacement, is key to preventing system failures and maintaining air quality.
- Use caution when handling wet pads and internal components to avoid slips or damage.
Tradie Pro Tip: When you've got the old pads out, take the extra minute to properly flush the water tank and check the distribution channels. A clean system runs more efficiently and helps your new filter pads last longer by ensuring even water saturation.
Pair With
Consider pairing this with our range of evaporative cooler pumps or a high-quality water treatment for preventing algae and mineral buildup, available in the HVAC Shop evaporative cooler spares section.