This Seeley V-belt (A49) is your genuine replacement part for keeping evaporative coolers running smoothly. It's purpose-built for Seeley units, ensuring your fan motor drives that big squirrel cage without a hitch.
In the Australian heat, a worn fan belt can mean a noisy unit or, worse, a seized fan, leaving your customers sweating. Having the right belt on hand saves call-backs and keeps the air moving.
Best For
- HVAC service technicians
- Evaporative cooler maintenance teams
- Competent DIY owners servicing Seeley evaporative coolers
Compatibility
This fan belt is specifically designed to suit various Seeley evaporative cooling units. It's a direct replacement for Seeley Part Number 828756.
If you're running a different model, check fittings and specs before ordering.
Features
- Genuine Seeley replacement part (PN 828756) for assured fit and performance.
- V-belt profile (A49) designed for optimal power transfer and longevity in evaporative cooler applications.
- Durable construction built to withstand the typical operating conditions of Australian evaporative cooling systems.
- Ensures correct fan speed and airflow for efficient cooling.
Technical Specifications
| Specification | Detail |
|---|---|
| Type | V-Belt |
| Profile / Size | A49 |
| Manufacturer Part Number | 828756 |
| Compatibility | Seeley Evaporative Coolers |
What's in the Box
- 1 x Seeley V-Belt (A49) - Part Number SY828756
Using It on the Job
- Always isolate power to the evaporative cooler at the mains and confirm zero voltage with a meter before starting any work.
- Access the fan motor and belt drive assembly, typically by removing the cabinet panels.
- Loosen the motor mount bolts to release tension on the old belt, then carefully remove it from the pulleys.
- Install the new Seeley V-belt onto both the motor pulley and the fan pulley, ensuring it's seated correctly in the grooves.
- Adjust the motor position to achieve proper belt tension – typically, a slight deflection of about 10-15mm when pressed firmly midway between the pulleys.
- Tighten the motor mount bolts securely, ensuring the motor and pulleys are aligned.
- Replace all panels, restore power, and test the unit for smooth, quiet operation.
Limitations & Safety Notes
- Only use this belt for compatible Seeley evaporative cooling units as specified.
- Ensure all power is isolated before working on the unit to prevent electrical hazards.
- Always check belt tension carefully; over-tensioning can damage bearings, while under-tensioning leads to slippage.
- Follow manufacturer's guidelines for your specific Seeley model during installation.
- Wear appropriate PPE, including safety glasses, when working on mechanical components.
Tradie Pro Tip
"Before you throw out the old belt, quickly compare it to the new one, especially if the old one snapped. Makes sure you've got the right length. Also, give those pulleys a good clean while you're in there to stop any premature wear on the new belt."
Pair With
Pair with a replacement Seeley motor, float valve, or control board for comprehensive evaporative cooler maintenance.