This Brivis Plastic Blade Fan Wheel (9 x 7, 1/2" bore) is a direct replacement part designed to restore proper airflow in your Brivis gas ducted heater. It's an essential component for HVAC technicians and competent DIY owners tackling maintenance or repairs on these common Australian heating systems.
Replacing a worn or damaged fan wheel can often prevent larger, more expensive issues down the line, especially when preparing for the cooler months. Keeping your heater running efficiently helps keep those energy bills in check.
Best For
- Brivis gas ducted heater repairs
- Routine maintenance and servicing
- HVAC technicians and apprentices
- Competent DIY owners maintaining their Brivis systems
Compatibility
This Brivis fan wheel is compatible with Brivis gas ducted heaters that utilise a 9 x 7 inch plastic blade fan wheel with a 1/2 inch bore. It replaces Brivis Part Numbers B014403 and 80014403. If you're running a different model, check fittings and specs before ordering.
Features
- Genuine Brivis Part: Ensures correct fitment and reliable performance within Brivis heating systems.
- Durable Plastic Construction: Designed for specific airflow requirements and longevity in ducted heater applications.
- Optimised 9x7 Sizing: Maintains factory airflow specifications for efficient heating.
- 1/2 Inch Bore: Standard sizing for direct compatibility with many Brivis fan motors.
Technical Specifications
| Specification | Detail |
|---|---|
| Type | Plastic Blade Fan Wheel |
| Size (Diameter x Width) | 9 x 7 inches |
| Bore Size | 1/2 inch |
| Material | Plastic |
| Colour | Black |
| Brivis Part Numbers | B014403, 80014403 |
What's in the Box
- 1 x Brivis Plastic Blade Fan Wheel (9 x 7 inch, 1/2 inch Bore)
Using It on the Job
- Isolate Power: Always ensure the Brivis ducted heater's main power supply is isolated and locked out before commencing any work.
- Access Fan Assembly: Carefully access the fan assembly within the heater unit, noting how the existing fan wheel is mounted and its rotation direction.
- Remove Old Wheel: Unfasten any securing pins, set screws, or bolts holding the old fan wheel to the motor shaft and slide it off.
- Install New Wheel: Mount the new Brivis fan wheel onto the motor shaft, ensuring it's fully seated and secured according to manufacturer specifications. Double-check its orientation.
- Verify Rotation: Manually spin the fan wheel to ensure it rotates freely without obstruction or rubbing.
- Reassemble & Test: Reassemble the heater components, restore power, and test the system for correct operation and airflow.
Limitations & Safety Notes
- This fan wheel is designed specifically for compatible Brivis gas ducted heater models as specified by the part numbers.
- Always isolate and lock out power to the appliance before attempting any maintenance or installation.
- Ensure the new fan wheel's 1/2 inch bore size precisely matches your heater's motor shaft for a secure and balanced fit.
- For complex repairs or if unsure, engaging a qualified and licensed HVAC technician is strongly recommended.
Always double-check the bore size and rotation direction of the old fan wheel before ordering and installing a replacement. A misaligned or incorrect fan can cause vibration and further damage to the motor or housing.
Pair With
Pair with a new Brivis fan motor if the old one shows signs of wear, or check out our range of Brivis control boards for a full system overhaul and improved efficiency.