These genuine Brivis Filter Pads are essential for keeping your Profiler, Promina, or Contour series evaporative cooler running efficiently and delivering clean, fresh air. Maintaining your filter pads is crucial, especially in Australia's dusty conditions, to ensure optimal cooling performance and prevent undue strain on your unit.
Regular replacement helps maintain airflow, extends the life of internal components, and keeps your cooler humming through those long, hot summers.
Best For
- HVAC service technicians performing routine evaporative cooler maintenance.
- Commercial and residential maintenance teams managing Brivis cooling systems.
- Competent DIY owners maintaining their Brivis evaporative coolers.
Compatibility
These Brivis filter pads are designed to fit the following evaporative cooler series:
- CONTOUR: L31, L32/A, L33, L34, L35, L36
- PROFILER: P43, P44
- PROMINA: P44, P45, P46
If you're running a different model, check fittings and specs before ordering.
Features
- Exact Fit: Manufactured to Brivis factory specifications (Part Number 81008317) for a perfect fit and seal.
- Optimised Filtration: Designed to capture dust and particles effectively, ensuring cleaner air delivery.
- Maintains Efficiency: Proper filtration helps the cooler operate at its designed airflow and cooling capacity.
- Longevity: Regular replacement protects your cooler's fan motor and pump from excessive wear due to debris.
Technical Specifications
| Specification | Detail |
|---|---|
| Dimensions (L x W x H) | 847mm x 530mm x 90mm |
| Brivis Part Number | 81008317 |
| Quantity | Set of 4 |
What's in the Box
- One (1) set of 4 Brivis Filter Pads, Part Number BS81008317.
Using It on the Job
- Isolate Power: Always ensure the main power supply to the evaporative cooler is switched off and locked out before commencing any work.
- Access Filters: Carefully open the cooler's cabinet to access the existing filter pads. Refer to your Brivis service manual for specific access points.
- Remove Old Pads: Unclip or slide out the old, dirty filter pads. Be prepared for some water and debris.
- Clean Housing: While the pads are out, take the opportunity to clean any accumulated sludge or mineral deposits from the filter housing and water pan.
- Install New Pads: Carefully insert the new Brivis filter pads, ensuring they are seated correctly and securely.
- Restore & Test: Close the cooler's cabinet, restore power, and run the unit to confirm proper operation and airflow.
Limitations & Safety Notes
- These filter pads are specifically for the Brivis Profiler, Promina, and Contour series as listed. Do not attempt to modify for other models.
- Always isolate electrical power to the unit before performing any maintenance or replacing parts.
- Dispose of old filter pads responsibly according to local council guidelines.
- Regular inspection is recommended to determine replacement frequency, which can vary based on local air quality and usage.
Tradie Pro Tip
Don't wait for your cooler's performance to drop before changing filters. A set of clean pads makes a huge difference to air quality and overall system efficiency, plus it extends the life of your pump and fan. Keep a spare set on the truck, especially before the summer rush.
Pair With
For complete evaporative cooler maintenance, consider pairing these filter pads with new Brivis evaporative cooler pumps, Brivis solenoids, or an antimicrobial treatment to keep your water system clear and hygienic.