These Brivis Contour Series filter pads are the real deal, designed to keep your evaporative cooler running clean and efficient. They trap dust, pollen, and other airborne particles before they circulate through your home, ensuring better indoor air quality.
In the harsh Australian climate, regular filter changes are crucial. I've seen firsthand how a choked-up system struggles, reducing airflow and working harder than it needs to. Swapping out your old pads is a straightforward job that makes a huge difference to your system's performance and longevity.
Best For
- Evaporative cooler service and maintenance teams.
- HVAC techs working on residential cooling systems.
- Competent DIY homeowners maintaining Brivis Contour Series units.
Compatibility
This set of Brivis filter pads is specifically manufactured for the Brivis Contour Series evaporative coolers. They are a direct fit for the following models:
- L46
- L51
- L52/A
- L53
- L54
- L55
- L75
The exact dimensions for each pad are 847mm (length) x 618mm (width) x 110mm (thickness). If you're running a different model, check fittings and specs before ordering.
Features
- Genuine Brivis Part: Ensures optimal fit and performance for your specific unit.
- Effective Filtration: Designed to capture dust and particles, improving air quality and system efficiency.
- Correct Dimensions: Each pad measures 847x618x110mm for a perfect seal and airflow.
- Set of Four: Provides a complete replacement for your Contour Series evaporative cooler.
Technical Specifications
| Specification | Detail |
|---|---|
| Dimensions (LxWxT) | 847mm x 618mm x 110mm (each pad) |
| Suits Brivis Models | L46, L51, L52/A, L53, L54, L55, L75 |
| Brivis Part Number | 81008327 |
What's in the Box
- A set of four (4) Brivis Filter Pads Contour Series, each 847mm x 618mm x 110mm.
Using It on the Job
- Isolate Power: Always turn off and lockout power to the evaporative cooler at the main switchboard before starting any work.
- Access Filters: Open the unit's cabinet or panels to access the existing filter pads.
- Remove Old Pads: Carefully remove the old, dirty filter pads. Note their orientation for correct installation of the new ones.
- Clean Housing: Use a brush or vacuum to clean out any accumulated dust, debris, or sediment from the filter housing and water pan.
- Install New Pads: Insert the new Brivis Contour Series filter pads, ensuring they fit snugly and are correctly seated.
- Reassemble & Test: Close up the unit, restore power, and test the cooler's operation. Check for proper airflow and cooling.
Limitations & Safety Notes
- These filter pads are specifically for Brivis Contour Series evaporative coolers only.
- Always confirm your unit's model number and existing filter dimensions before purchasing to ensure compatibility.
- Ensure power is isolated before undertaking any maintenance work on evaporative coolers.
- Follow all manufacturer's instructions and relevant Safe Work Australia guidelines for appliance servicing.
Tradie Pro Tip
Don't just hose down old, heavily soiled pads – replace them. Clogged filters significantly reduce airflow and make the fan motor and water pump work harder, leading to higher running costs and premature wear. A fresh set makes a noticeable improvement to system performance and the quality of air delivered.
Pair With
Pair these filter pads with a new evaporative cooler pump and a float valve for a comprehensive annual service. Consider exploring our antimicrobial treatment products to help keep your water system clean and hygienic.