These Brivis Evap Pad Filter Pads are an essential maintenance item for keeping your Brivis Advance series evaporative cooler running efficiently through those long Aussie summers. A fresh set helps maintain proper airflow and cooling performance, ensuring your system isn't working overtime.
Anyone who's done a few seasons knows how much gunk these pads collect, especially in dusty areas; swapping them out is a simple job but makes a huge difference to air quality and cooling capacity.
Best For
- HVAC service technicians and maintenance teams
- Owners of Brivis Advance series evaporative coolers
- Seasonal evaporative cooler servicing
Compatibility
This set of filter pads is specifically designed for the Brivis Advance Series evaporative coolers, including models F23, F24, F25, F25D, F26, F33, F34, F35, F35D, and F36. Each pad measures 850mm x 400mm x 75mm.
If you're running a different model, check fittings and specs before ordering.
Features
- Genuine Brivis Part: Manufactured to Brivis's specifications for optimal fit and performance.
- Standard Dimensions: Each pad measures 850mm (height) x 400mm (width) x 75mm (depth).
- Complete Set: Includes four (4) filter pads, providing a full replacement for most standard evaporative cooler units.
- Improved Airflow & Cooling: Fresh pads ensure maximum water absorption and efficient evaporation, leading to better cooling.
Technical Specifications
| Specification | Detail |
|---|---|
| Dimensions (each pad) | 850mm (H) x 400mm (W) x 75mm (D) |
| Quantity | Set of 4 pads |
| Brivis Part Number | 81008767 |
| SKU | BS81008767 |
What's in the Box
- 4 x Brivis Evap Filter Pads, 850x400x75mm
Using It on the Job
- Isolate Power: Always turn off and lockout the power to the evaporative cooler at the mains before starting any work.
- Drain Water: Ensure the unit's water reservoir is drained and empty.
- Remove Old Pads: Carefully remove the old, worn-out filter pads from their frames. Take note of their orientation.
- Clean & Inspect: Clean out any debris from the pad frames and the cooler interior. Check for any blockages in the water distribution system.
- Install New Pads: Insert the new Brivis filter pads into the frames, ensuring they fit snugly and are correctly oriented.
- Refill & Test: Restore power, refill the unit, and run the cooler to check for proper operation and cooling.
Limitations & Safety Notes
- These pads are specific to Brivis Advance series models as listed. They are not a universal fit.
- Always disconnect power to the unit before commencing any maintenance or replacement work.
- Dispose of old filter pads responsibly.
- Follow all manufacturer guidelines and Safe Work Australia practices during service.
Tradie Pro Tip
When you're changing these pads, always give the inside of the cooler a good hose down and check the drain for any blockages. A clean system runs cooler and quieter, extending the life of your pump and fan motor.
Pair With
Pair these filter pads with a new Brivis float valve or a replacement Brivis pump for a complete evaporative cooler service, ensuring your unit is ready for the next heatwave. Consider an antimicrobial treatment for your water system to keep things hygienic.