This Brivis Electrode Square Flame Rod (Part CB2058) is a direct replacement part for keeping your ducted gas heater firing reliably. It's an essential component for any HVAC tech or competent DIY owner looking to fix ignition issues in Brivis gas heating systems.
Anyone who's done a few gas heater services knows a faulty flame rod can cause intermittent firing or lockout codes, especially when the weather really turns cold here in Australia. Swapping out a worn rod often sorts these headaches out.
Best For
- Qualified HVAC and gas technicians
- Service and maintenance teams working on Brivis ducted gas heaters
- Competent DIY owners undertaking Brivis heater maintenance (with gas work qualifications)
Compatibility
The Brivis CB2058 Electrode Square Flame Rod is designed as a genuine spare part for a range of Brivis ducted gas heaters. It serves as a direct replacement for the specified original flame rod in compatible Brivis heating units.
If you're running a different model, check fittings and specs before ordering.
Features
- Genuine Brivis Part: Ensures exact fit and reliable performance in Brivis systems.
- Square Flame Rod Design: Matches original equipment specifications for consistent flame sensing.
- Reliable Ignition: Crucial for ensuring the gas heater ignites and operates safely.
- Direct Replacement: Specifically designed to replace Brivis Part CB2058 without modification.
What's in the Box
- 1x Brivis Electrode Square Flame Rod (CB2058)
Using It on the Job
- Isolate Power & Gas: Before starting any work, ensure the main power to the heater and the gas supply are switched off and locked out.
- Access & Remove Old Rod: Safely open the heater access panel and carefully disconnect and remove the faulty flame rod.
- Clean Area: While the panel is open, clean any dust or carbon buildup around the ignitor and burner assembly.
- Install New Rod: Insert the new Brivis CB2058 flame rod, ensuring it's correctly seated and connections are secure.
- Restore & Test: Reassemble the heater, restore power and gas, then test the ignition sequence multiple times to confirm proper operation and check for any error codes.
Limitations & Safety Notes
- This part is exclusively for use with compatible Brivis ducted gas heating systems.
- All work involving gas appliances must be carried out by a qualified and licensed gas fitter or HVAC technician in Australia.
- Always follow the Brivis manufacturer's installation instructions and local gas safety regulations.
- Ensure power and gas supplies are isolated before commencing any service or repair work.
Tradie Pro Tip
When you're swapping out a flame rod, it's always worth giving the ignitor and burner a good clean with a brush. Sometimes, a bit of carbon buildup is all it takes to throw off your ignition sequence, even with a new rod.
Pair With
Consider pairing this flame rod with a set of gas pressure gauges and a dedicated burner brush to ensure a thorough service. You might also want to check out other Brivis control boards or sensors if you're troubleshooting multiple issues.