These Brivis Contour Series filter pads, part number BSB008822, are genuine replacements designed to keep your evaporative cooler performing its best. They're essential for ensuring clean, cool air delivery and protecting your unit's internal components.
After a long Aussie summer, these pads often get clogged with dust and debris, so a fresh set makes a real difference to airflow and efficiency. Regularly replacing your filter pads ensures your Brivis unit continues to provide optimal cooling performance.
Best For
- Evaporative cooler service technicians
- Routine maintenance for Brivis Contour Series units
- Filter replacement for improved air quality and efficiency
Compatibility
These filter pads are specifically designed for Brivis Contour Series evaporative coolers. They suit models L11, L12, L12/A, and L13. If you're running a different model, check fittings and specs before ordering.
Features
- Genuine Brivis replacement part, B008822.
- Standard dimensions of 847 x 530 x 60 mm for a precise fit.
- Designed for Brivis Contour Series evaporative coolers (L11, L12, L12/A, L13).
- Supplied as a complete set of four pads for a full replacement.
Technical Specifications
| Specification | Detail |
|---|---|
| Type | Evaporative Cooler Filter Pad |
| Dimensions (L x W x D) | 847 x 530 x 60 mm |
| Suits Brivis Models | L11, L12, L12/A, L13 |
| Quantity | 4 pads (set) |
| Brivis Part Number | B008822 |
What's in the Box
- 1 x Set of 4 Brivis Contour Series Filter Pads (BSB008822)
Using It on the Job
- Isolate power to the Brivis evaporative cooler at the mains switchboard before commencing any work.
- Access the filter pad compartments, typically by removing the side panels or grille.
- Carefully remove the old, worn, or clogged filter pads. Be prepared for potential water spillage.
- Clean the filter channels and any debris in the water tray before installing new pads.
- Insert the new Brivis Contour Series filter pads, ensuring they sit flush and correctly within their frames.
- Replace panels, restore power, and test the cooler's operation.
Limitations & Safety Notes
- Always isolate power before opening or servicing any electrical appliance.
- Only use these pads with the specified Brivis Contour Series models (L11, L12, L12/A, L13).
- Follow all manufacturer instructions and relevant Safe Work Australia guidelines for working with evaporative coolers.
- Inspect pads regularly, especially in dusty environments, and replace them when they show signs of clogging or degradation.
Tradie Pro Tip: When you're replacing these, take a few extra minutes to clean out the water distribution channels and the water tank itself. It prevents mould and mineral build-up, keeping the new pads cleaner for longer and improving overall system hygiene.
Pair With
Pair with other Brivis evaporative cooler spares like pumps or float valves, and consider a coil cleaner for deep cleaning hard-to-reach areas during major services.