Keep your Brivis evaporative cooler running clean and efficient with these genuine Brivis Advance Series Filter Pads. This set of four pads is essential for maintaining optimal air quality and system performance, helping Australian tradies and competent DIY owners extend the life of their units.
Anyone who's battled through a dusty Aussie summer knows the importance of clean evap cooler pads. Swapping out old, caked-up pads for a fresh set is a quick win for better airflow and cooler air inside.
Best For
- Routine evaporative cooler maintenance
- Replacing worn or dirty Brivis Advance Series filter pads
- Ensuring clean and efficient cooling system operation
- HVAC technicians and skilled homeowners
Compatibility
These Brivis filter pads are designed to fit a range of Brivis Advance Series evaporative cooler models, including:
- Brivis F23
- Brivis F76
- Brivis F85D
- Brivis CX180
- Brivis CX220
If you're running a different model, check fittings and specs before ordering.
Features
- Genuine Brivis Part: Ensures perfect fit and reliable performance for your Advance Series cooler.
- Optimal Filtration: Designed to capture dust and particles, delivering cleaner air.
- Standard Dimensions: Sized correctly for specified Brivis models.
- Set of Four: Provides a complete replacement for your evaporative cooler.
Technical Specifications
| Specification | Detail |
|---|---|
| Dimensions (approx.) | 850mm x 787mm x 75/90mm |
| Part Number | 81061205 |
| Quantity | Set of 4 pads |
What's in the Box
- 4 x Brivis Filter Pads (Advance Series, 850X787X75/90)
Using It on the Job
- Isolate Power: Always switch off and lockout the main power supply to the evaporative cooler before starting any work.
- Access Pads: Carefully remove the cooler's outer panels to gain access to the old filter pads.
- Remove Old Pads: Unclip or slide out the existing, worn-out filter pads. Note their orientation.
- Clean Unit: While accessible, clean the cooler's water tray, float valve, and distribution channels to remove any sediment or algae build-up.
- Install New Pads: Insert the new Brivis filter pads, ensuring they are correctly seated and oriented according to the manufacturer's instructions.
- Restore Power & Test: Re-secure all panels, restore power, and run the cooler to check for proper operation and water flow over the new pads.
Limitations & Safety Notes
- Only for use with the specific Brivis Advance Series models listed. Verify your model number before purchase.
- Always ensure power is isolated and locked out before attempting any maintenance on evaporative coolers.
- Handle pads carefully to avoid damage during installation.
- Dispose of old filter pads responsibly according to local council guidelines.
- Follow all manufacturer's installation and safety instructions for your Brivis evaporative cooler.
Tradie Pro Tip: When you're swapping out these pads, take the extra five minutes to give the water tray and pump a good scrub. You'd be surprised how much gunk builds up over a season, and a clean tray makes a huge difference to both air quality and pump life.
Pair With
Pair with Brivis float valves, replacement pumps, and a quality coil cleaner for comprehensive evaporative cooler maintenance.