These Brivis Advance Series filter pads are direct replacement parts for your evaporative cooler, ensuring your system keeps pulling in fresh, clean air. They’re designed to fit specific Brivis models, helping maintain peak cooling performance and air quality.
Working on evaporative coolers in the Aussie summer means dealing with dust and debris. Fresh filter pads are crucial; a choked set means your unit works harder for less cool air, impacting efficiency and costing more to run.
Best For
- Routine maintenance of Brivis Advance Series evaporative coolers.
- HVAC technicians performing evaporative cooler servicing.
- Competent DIY owners replacing worn or damaged filter pads.
Compatibility
These filter pads are specifically suited for Brivis Advance Series evaporative coolers, including models:
- F53
- F54
- F55, F55D
- F56
- F65, F65D
- F66, F66DS
- F75, F75D
- CX140
If you're running a different model, check fittings and specs before ordering.
Features
- Direct Fit Replacement: Engineered to precisely fit specified Brivis Advance Series evaporative coolers.
- Optimal Air Filtration: Designed to capture dust and particles effectively, ensuring cleaner air delivery.
- Standard Dimensions: Each pad measures 850x485x90mm for accurate installation.
- Convenient Set: Supplied as a set of four pads to refresh your entire unit.
- Genuine Part: Identified by Brivis Part Number 81008769.
Technical Specifications
| Specification | Detail |
|---|---|
| Dimensions (each pad) | 850mm (L) x 485mm (W) x 90mm (D) |
| Quantity | Set of 4 pads |
| Brivis Part Number | 81008769 |
| Suits Models | F53, F54, F55, F55D, F56, F65, F65D, F66, F75, F75D, F66DS, CX140 |
What's in the Box
- 4 x Brivis Advance Series Filter Pads (850x485x90mm)
Using It on the Job
- Isolate Power: Always disconnect power to the evaporative cooler at the mains before starting any work.
- Drain and Clean Unit: Drain the water reservoir and thoroughly clean the unit base and water distribution system to remove scale and sludge.
- Remove Old Pads: Carefully unclip or remove the securing brackets for the old, worn filter pads. Dispose of them responsibly.
- Install New Pads: Position the new Brivis filter pads firmly into place, ensuring they sit correctly in their channels without gaps.
- Secure Pads: Reinstall any clips or brackets to hold the new pads securely.
- Restore Power & Test: Reconnect power and run the unit in fan-only mode first, then engage cooling to check for proper operation and water flow over the pads.
Limitations & Safety Notes
- These pads are designed only for the specific Brivis Advance Series models listed.
- Always ensure the power is isolated before working on any evaporative cooler.
- Regular inspection and cleaning of your evaporative cooler are crucial for efficiency and hygiene.
- Follow Brivis manufacturer's instructions for installation and maintenance.
Tradie Pro Tip
When you've got the pads out, take the extra five minutes to give the water distribution tray and the float valve area a good scrub. Prevents premature blockages and ensures even wetting of your new pads.
Pair With
Pair these filter pads with a quality evaporative cooler cleaning solution and a replacement float valve to ensure your Brivis unit is fully serviced and running fresh.