This genuine Breezair Direct Drive Icon Motor is a direct replacement for 550W evaporative cooler units, ensuring your system keeps pushing air efficiently through those hot Australian summers. When your cooler's fan motor gives up the ghost, you need a reliable part that drops straight in to restore airflow.
It's a common job on evaporative units across the country, especially after years of hard work in dusty conditions. Getting the right replacement minimises downtime.
Best For
- HVAC technicians replacing worn or failed evaporative cooler motors.
- Maintenance teams servicing Breezair residential and light commercial units.
- Competent DIY owners undertaking repairs on their own Breezair evaporative cooling systems.
Compatibility
This 550W Direct Drive Icon Motor is specifically designed as a direct replacement for Breezair evaporative cooling units. It matches the original specifications for optimal performance and fit within compatible models.
If you're running a different model or brand, check fittings and specs before ordering.
Features
- Genuine Breezair part, ensuring precise fit and intended performance.
- Direct drive design for efficient and quiet operation.
- Rated at 550 Watts, matching original equipment power output.
- Robust construction built for the demands of continuous evaporative cooling.
Technical Specifications
| Specification | Detail |
|---|---|
| Part Number | SY095936 (Seeley PN 095936) |
| Power Rating | 550 Watts |
| Type | Direct Drive Icon Motor |
| Manufacturer Compatibility | Breezair units |
What's in the Box
- 1 x Breezair Direct Drive Icon Motor 550W (SY095936)
Using It on the Job
- Always isolate power to the evaporative cooler at the mains and confirm zero voltage with a multimeter before starting any work.
- Carefully disconnect the wiring from the old motor, noting the connections or taking a photo.
- Unbolt and remove the old motor, paying attention to mounting brackets and alignment with the fan blade.
- Install the new Breezair Direct Drive Icon Motor, ensuring it's securely fastened and correctly aligned to prevent vibration.
- Reconnect electrical wiring exactly as per the original setup. Double-check all connections for tightness.
- Restore power and test the unit's operation, monitoring for smooth startup and correct fan speed.
Limitations & Safety Notes
- This motor is for Breezair units only; confirm compatibility with your model before installation.
- Electrical work must be performed by a licensed electrician or competent person following Australian standards.
- Always isolate and lock out power to the unit before commencing any repairs or maintenance.
- Wear appropriate personal protective equipment (PPE), including safety glasses and gloves, during installation.
- Ensure all electrical connections are clean, tight, and insulated correctly after installation.
Tradie Pro Tip
Before firing up the new motor, always give the fan blade a manual spin to check for any binding or rubbing. A perfectly free-spinning blade means less stress on your new motor and a smoother run from day one. Don't forget to clean the fan cowling while you're in there.
Pair With
Consider pairing this motor with new evaporative cooler filter pads for optimal performance, or a replacement control board if your existing electronics are also showing signs of wear. Keep your unit running its best with genuine parts and regular maintenance.