This is a genuine Breezair CPMD wall controller, designed to replace faulty or worn-out units in specific Breezair evaporative coolers. It's essential for maintaining precise control over your cooler's operation, especially heading into another hot Australian summer.
Nothing's worse than trying to troubleshoot a cooling system when the controls are intermittent, and swapping out the wall controller is often the quickest fix for erratic behaviour.
Best For
Evaporative cooler maintenance techs, DIY owners replacing a faulty controller, and service teams for Breezair EXH, EZH, or EXD models.
Compatibility
This Breezair CPMD wall controller is specifically designed for:
- Breezair EXH evaporative cooling units
- Breezair EZH evaporative cooling units
- Breezair EXD evaporative cooling units
It is a direct replacement for Seeley Part Number 110196RP. If you're running a different model, check fittings and specs before ordering.
Features
- Genuine Breezair replacement part.
- Direct fit for EXH, EZH, and EXD series evaporative coolers.
- Restores full control functionality to your evaporative cooling system.
- Matches original equipment specifications for reliable operation.
What's in the Box
- 1 x Breezair CPMD Wall Controller (Part Number SY110196RP / Seeley PN 110196RP)
Using It on the Job
- Safety First: Before starting any work, always isolate power to the evaporative cooler at the main switchboard and apply lockout/tagout procedures.
- Access Old Controller: Carefully remove the old wall controller from its mounting location, usually by unclipping or unscrewing it from the wall box.
- Disconnect Wiring: Take a photo of the existing wiring configuration before disconnecting the wires from the terminals of the old controller. Note wire colours and terminal markings.
- Connect New Controller: Wire the new Breezair CPMD controller exactly as the old one was connected, using your photo as a guide. Ensure all connections are secure and tidy.
- Mount and Test: Mount the new controller to the wall, restore power to the cooler, and test all functions (on/off, fan speeds, modes, etc.) to confirm correct operation.
Limitations & Safety Notes
- Only for use with Breezair EXH, EZH, and EXD evaporative cooler models. It will not function correctly with other systems.
- Always isolate power before working on electrical components. Failure to do so can result in serious injury or death.
- If you're unsure about the installation process, consult a qualified electrician or HVAC technician.
- Follow all Australian standards and Safe Work guidance when performing maintenance or repairs.
Tradie Pro Tip
Before you even disconnect the old controller, grab your phone and snap a quick pic of the wiring. It'll save you a heap of head-scratching when you're hooking up the new one, especially if the original installer didn't follow standard colour codes.
Pair With
Pair with replacement filter pads and a quality evaporative cooler pump for a full service, or check out our range of universal electrical spares for other common fixes.