This Braemar Magiqtouch 1M Test Cable (SY862873) is your go-to for troubleshooting Braemar Magiqtouch controllers, making diagnostics quicker and more reliable when you're on a job.
In the Australian climate, efficient heating and cooling are crucial, and accurate fault finding with the right tools prevents costly callbacks and keeps systems running smoothly. Anyone who's spent an hour tracing wiring knows how critical a dedicated test lead can be for getting a quick read on a control circuit.
Best For
- HVAC service technicians
- Heating system installers
- Maintenance teams working on Braemar equipment
- Braemar equipment specialists
Compatibility
This test cable is designed specifically for Braemar Magiqtouch controllers that utilise a 6-pin diagnostic port. It ensures a direct and secure connection for accurate readings during system checks.
If you're running a different model, check fittings and specs before ordering.
Features
- Braemar Loom: Original equipment quality for reliable connections.
- 6-Pin Connector: Standard fit for Magiqtouch controller diagnostic ports.
- 1 Metre Length: Provides adequate reach for comfortable diagnostics without straining connections.
- Dedicated Test Cable: Specifically designed for diagnostic purposes, reducing risk of accidental damage.
Technical Specifications
| Specification | Detail |
|---|---|
| Part/Code | SY862873 (Seeley PN: 862873) |
| Cable Length | 1 Metre |
| Connector Type | 6 Pin (MagiqTouch) |
| Suits | Braemar MagiqTouch controllers |
What's in the Box
- 1x Braemar Magiqtouch 1M Test Cable (SY862873)
Using It on the Job
- Isolate Power: Always ensure power to the Braemar Magiqtouch controller is completely isolated and locked out before attempting any connections.
- Locate Port: Identify the correct 6-pin diagnostic port on the Magiqtouch controller. Refer to the unit's service manual if unsure.
- Connect Cable: Carefully plug the test cable into the diagnostic port, ensuring a secure and full connection to prevent intermittent readings.
- Connect Tool: Attach your diagnostic tool (e.g., multimeter, dedicated analyser) to the other end of the test cable as required.
- Restore Power: Once connections are verified, restore power to the controller and proceed with fault finding or parameter checks.
- Disconnect Safely: After completing diagnostics, isolate power again before carefully disconnecting the test cable and your diagnostic tools.
Limitations & Safety Notes
- This cable is exclusively for diagnostic testing with Braemar Magiqtouch controllers.
- Always disconnect power to the unit before attaching or removing the test cable to avoid electrical hazards.
- Not designed for permanent installation or continuous operation; it's a diagnostic tool only.
- Handle with care to protect the pins and cable sheath from damage.
- Follow all Australian standards and Safe Work guidance when performing electrical diagnostics.
Before you start tearing into a Braemar Magiqtouch controller with a multimeter, grab this dedicated test cable. It saves a heap of time and reduces the risk of accidentally shorting pins when you're trying to get a quick voltage reading in a tight spot. It's a simple tool that makes a big difference.
Pair With
Pair with a reliable digital multimeter and the relevant Braemar service manual to quickly diagnose controller faults. Consider adding other Braemar spares to your kit to be ready for the common repairs.