This Braemar Electrode Ignitor Spark Sensor is a critical component for getting your ducted gas heater firing up reliably. It's built tough for the job, ensuring that spark hits right where it needs to, even when the unit's copping a bit of dust up in the roof space.
Keeping your heater in top shape means consistent warmth through those chilly Australian mornings. A faulty ignitor can stop your system dead, making this replacement sensor a key piece for proper maintenance.
Best For
- Licensed gas appliance technicians
- HVAC service and maintenance teams
- Owners of Braemar ducted gas heaters requiring genuine replacement parts
Compatibility
This electrode spark sensor is a direct replacement part for Braemar ducted gas heaters. It corresponds to Braemar Part/Code SY622453 and Seeley PN: 622453. Its specific 75-degree angle ensures correct fitment within compatible units.
If you're running a different model, check fittings and specs before ordering.
Features
- Direct replacement for Braemar Part/Code SY622453.
- Engineered with a precise 75-degree angle for accurate positioning.
- Ensures reliable and consistent ignition within ducted gas heaters.
- Matches OEM specifications for dependable performance.
Technical Specifications
| Specification | Detail |
|---|---|
| Part/Code | SY622453 |
| Seeley PN | 622453 |
| Angle | 75 Degrees |
What's in the Box
- 1x Braemar Electrode Ignitor Spark Sensor (75 Degrees)
Using It on the Job
- Isolate Power: Always begin by cutting power to the heater at the main switchboard and applying lockout/tagout procedures.
- Access Assembly: Carefully locate and access the ignition assembly within the Braemar heater unit.
- Remove Old Sensor: Disconnect the wiring and carefully unmount the old sensor, paying close attention to its orientation.
- Install New Sensor: Mount the new Braemar SY622453 sensor, ensuring the 75-degree angle aligns perfectly for proper spark gap.
- Reconnect & Inspect: Securely reconnect all wiring and perform a visual check of all connections and clearances.
- Test Functionality: Restore power and initiate the heater's ignition sequence, verifying a strong, consistent spark and successful burner light-off.
Limitations & Safety Notes
- Work on gas appliances requires appropriate licensing and certification (e.g., a licensed gasfitter in Australia).
- Always ensure electrical isolation and follow safe work practices when dealing with heater components.
- Verify that this specific part number (SY622453) matches your heater's requirements before installation.
- Follow all Australian standards and manufacturer's guidelines for gas appliance servicing.
Tradie Pro Tip
Before pulling the old ignitor out, snap a quick photo of the wiring and mounting angle. It saves a heap of head-scratching when you're trying to fit the new one back in a tight spot, especially with that specific 75-degree bend.
Pair With
Pair with other genuine Braemar spares, gas pressure regulators, and a quality combustion analyser to ensure your ducted gas heater is running efficiently and safely after any service.