Bonaire H2O Optimiser Drain Valve

$495.00
$495.00
$0
Sold out
Quantity must be 1 or more

This Bonaire H2O Optimiser Drain Valve (CTSPS6061640SP) is the replacement part for keeping your Bonaire evaporative cooler running efficiently. It's designed to manage water levels and ensure proper drainage, a key task for preventing issues like scale buildup and stagnant water.

Anyone who's tackled a corroded or leaking drain valve on a scorching Australian summer day knows the value of having the right replacement on hand to get the unit back in action fast.

Best For

  • HVAC technicians performing evaporative cooler maintenance.
  • Service teams troubleshooting Bonaire evaporative units.
  • Competent DIY owners maintaining their Bonaire evaporative coolers.

Compatibility

This H2O Optimiser Drain Valve is a specific, new style replacement part designed to suit Bonaire Evaporative Units. It corresponds to Bonaire Part Number SPS6061640SP.

If you're running a different model, check fittings and specs before ordering.

Features

  • New style Bonaire Drain Valve for reliable operation.
  • Direct replacement, ensuring a precise fit for compatible Bonaire evaporative units.
  • Essential component for maintaining water quality and preventing overflow in your cooler.

What's in the Box

  • One (1) Bonaire H2O Optimiser Drain Valve (CTSPS6061640SP).

Using It on the Job

  1. Isolate Power: Always begin by turning off and isolating the main power supply to the evaporative cooler at the circuit breaker or isolation switch. Apply lockout/tagout procedures if on a commercial site.
  2. Drain Water: Manually drain any remaining water from the cooler's reservoir. A wet/dry vacuum can help speed this up.
  3. Remove Old Valve: Carefully disconnect any wiring or plumbing attached to the old drain valve. Unscrew or unclip the old valve, taking note of its orientation and any seals.
  4. Clean Area: Clean the mounting area thoroughly to ensure no debris or scale build-up interferes with the new valve's seal.
  5. Install New Valve: Fit the new Bonaire H2O Optimiser Drain Valve (CTSPS6061640SP), ensuring any seals or gaskets are correctly seated. Connect plumbing and wiring as removed.
  6. Test Operation: Restore power and carefully fill the evaporative cooler. Observe the drain valve's function through a full cycle to confirm correct operation and check for any leaks.

Limitations & Safety Notes

  • Only compatible with specified Bonaire Evaporative Units; verify part numbers (CTSPS6061640SP or Bonaire PN SPS6061640SP) before purchase.
  • Always isolate power before attempting any service or maintenance on evaporative coolers to prevent electrical shock.
  • Follow manufacturer's installation guidelines for your specific Bonaire unit.
  • Ensure all connections are secure and leak-free after installation.

Tradie Pro Tip: When replacing a drain valve, always take a moment to inspect the condition of the cooler's basin and float switch. Often, if the drain valve is giving out, other components might be showing signs of wear or scale, and addressing them all at once saves you a second call-out.

Pair With

Consider pairing this with Bonaire evaporative cooler filter pads and a quality evaporative cooler pump to ensure your unit is running at peak performance. A good coil cleaner can also help maintain system efficiency.

Go to full site