This Bonaire Green Fan Blade is a direct replacement part designed to keep your evaporative cooler running smoothly. It's crucial for moving air effectively through your home or workshop, especially during those long, hot Australian summers. I've seen plenty of old units struggling with cracked or unbalanced blades – swapping it out makes a real difference to performance.
Keeping your evaporative cooler in top shape with genuine parts helps maintain performance and efficiency, ensuring you get the most out of your cooling system.
Best For
- Evaporative cooler maintenance and repair
- Replacing damaged or worn fan blades
- Routine servicing for Bonaire VSM65/60 and VSL75/70 units
- Restoring efficient airflow and reducing noise from unbalanced blades
Compatibility
This genuine Bonaire green fan blade is specifically made for Bonaire VSM65/60 and VSL75/70 evaporative cooler models. It's Bonaire Part Number 6080805SP, ensuring a direct fit and proper operation within these systems. If you're running a different model, check fittings and specs before ordering.
Features
- Genuine Bonaire OEM part for reliable performance
- Designed specifically for VSM65/60 and VSL75/70 evaporative cooler units
- Original green finish matches factory specifications
- Essential component for maintaining optimal cooler airflow
What's in the Box
- 1x Bonaire Green Fan Blade (Part Number 6080805SP)
Using It on the Job
- Isolate all power to the evaporative cooler at the mains switchboard and confirm zero voltage with a meter. Use lockout/tagout procedures if on a commercial site.
- Carefully access the fan motor assembly, which usually involves removing the top cover and sometimes side panels of the cooler.
- Unbolt or unclip the old fan blade from the motor shaft. Pay attention to any spacers, keyways, or washers for correct reassembly.
- Clean any accumulated dust or debris from the motor shaft and surrounding housing to ensure smooth operation.
- Install the new Bonaire Green Fan Blade, making sure it is securely fastened and properly centred on the shaft. Hand-turn the blade to check for any obstructions or binding.
- Once reassembled, restore power to the unit and test its operation. Listen for smooth, quiet fan rotation and confirm proper airflow.
Limitations & Safety Notes
- This fan blade is only compatible with Bonaire VSM65/60 and VSL75/70 evaporative cooler models.
- Always ensure power is completely isolated and confirmed safe before undertaking any work on an evaporative cooler.
- Follow all manufacturer's installation guidelines and relevant Australian safety standards when replacing parts.
- Regularly check fan blades for signs of wear, cracks, or imbalance to prevent further damage to the cooler motor.
Tradie Pro Tip
Before installing a new fan blade, always give it a quick visual inspection for any transit damage. A small crack or bend can lead to imbalance, causing noisy operation and premature motor bearing wear down the track. Also, make sure the hub is centred properly on the motor shaft before tightening.
Pair With
Pair with new evaporative cooler filter pads and a replacement pump for a complete evaporative cooler service. Also check our range of Bonaire wall controllers and water valves to ensure your system is running efficiently.