This set of four Bonaire Filter Pads is crucial for keeping your evaporative cooler running efficiently and delivering fresh, clean air. These pads are designed as a direct replacement for specific Bonaire VSM, BBM, and SBM models, ensuring a proper fit and optimal performance.
Living in Australia, we know how much dust, pollen, and airborne debris an evaporative cooler can pull through, especially during summer. Regular pad replacement is key to maintaining air quality and system effectiveness.
Best For
- Routine maintenance on compatible Bonaire evaporative coolers.
- Replacing worn, clogged, or damaged filter pads.
- Ensuring optimal cooling performance and air quality.
Compatibility
These Bonaire Filter Pads are specifically designed for the following evaporative cooler models:
- Bonaire VSM60
- Bonaire VSM65
- Bonaire VSM65/60
- Bonaire BBM950
- Bonaire SBM60
- Bonaire SBM65
If you're running a different model, check fittings and specs before ordering.
Features
- Genuine Bonaire Part: Ensures perfect fit and reliable performance as per manufacturer specifications.
- Set of 4 Pads: Provides a complete replacement for your cooler's pad set.
- Optimised Filtration: Designed to capture dust and impurities while allowing efficient water evaporation.
- Durable Construction: Built to withstand continuous water flow and airflow within the cooler's operating environment.
Technical Specifications
| Specification | Detail |
|---|---|
| Part Number | 6050115SP (CTSPS6050115SP) |
| Pad Dimensions (L x W x H) | 755mm x 487mm x 85mm or 755mm x 479mm x 75mm |
| Quantity | Set of 4 Pads |
| Compatibility | Bonaire VSM60, VSM65, VSM65/60, BBM950, SBM60, SBM65 |
What's in the Box
- 1 x Set of 4 Bonaire Filter Pads Medium VSM60-65
Using It on the Job
- Isolate Power: Always ensure the evaporative cooler's power supply is switched off and locked out at the main switchboard before starting work.
- Drain Water: Drain any remaining water from the cooler's reservoir and remove access panels.
- Remove Old Pads: Carefully unclip or slide out the old filter pads. Note their orientation for correct reinstallation.
- Clean & Inspect: Clean the cooler's water distribution system and reservoir, checking for blockages or wear on other components.
- Install New Pads: Slide the new Bonaire filter pads into place, ensuring they fit snugly and are oriented correctly.
- Test Operation: Reassemble the cooler, refill the reservoir, and restore power. Run a test cycle to check for proper water flow and cooling.
Limitations & Safety Notes
- Always disconnect and lock out power to the evaporative cooler before performing any maintenance or pad replacement.
- Carefully measure your existing filter pads and check against the listed dimensions to ensure you order the correct size for your specific unit.
- Follow all manufacturer's instructions and Safe Work practices when servicing evaporative cooling equipment.
Regularly check your filter pads, especially after dusty periods. Cleaning them with a soft brush and fresh water can extend their life, but when they start to sag, harden, or smell musty, it's time for a full replacement to keep the air fresh.
Pair with evaporative cooler pumps or water treatment products to prolong the life of your system and maintain water quality.