Bonaire Aquamiser Drain Valve

$578.00
$578.00
$0
Sold out
Quantity must be 1 or more

This genuine Bonaire Aquamiser Drain Valve is a direct replacement part essential for maintaining your Bonaire evaporative cooler. It's crucial for efficiently flushing out dirty water and preventing issues like constant dribbling or pan overflows, especially during a hot Australian summer when your cooler needs to perform.

Keeping your drain valve in good nick ensures your evaporative unit cycles correctly, preventing algae build-up and keeping your system running clean and efficient. If you’ve got water constantly running or pooling when it shouldn’t, this is usually the culprit.

Best For

  • HVAC service technicians maintaining Bonaire evaporative coolers.
  • Competent DIY owners replacing parts on their Bonaire evaporative units.
  • Preventative maintenance and essential repairs on Bonaire evaporative systems.

Compatibility

This Aquamiser Drain Valve (Part/Code: CTSPS6051658SP, Bonaire PN 6051658SP) is specifically designed to suit Bonaire evaporative cooling units. If you're running a different model, check fittings and specs before ordering.

Features

  • Genuine Bonaire replacement part ensures exact fit and reliable operation.
  • Distinctive green drain valve indicates the specific Bonaire Aquamiser model.
  • Designed for direct compatibility with specified Bonaire evaporative cooler units.
  • Helps maintain optimal water quality and prevent scale or algae build-up.

What's in the Box

  • 1 x Bonaire Aquamiser Drain Valve (Green)

Using It on the Job

  1. Before commencing any work, isolate power to the evaporative cooler at the switchboard. Confirm it's off with a multimeter if you're unsure.
  2. Drain any remaining water from the unit's pan.
  3. Carefully unclip or unthread the old drain valve, taking note of its orientation and any associated tubing.
  4. Clean the mounting surface where the new valve will sit to ensure a clean, watertight seal.
  5. Install the new Bonaire Aquamiser Drain Valve (CTSPS6051658SP), making sure all connections are secure and the valve is correctly seated.
  6. Restore power to the unit and test the cooler's drain cycle thoroughly, checking for any leaks during operation.

Limitations & Safety Notes

  • This valve is only for compatible Bonaire evaporative cooling units as listed.
  • Always ensure electrical power is fully isolated before undertaking any maintenance or replacement work on the cooler.
  • Refer to your specific Bonaire unit's service manual for model-specific installation instructions.
  • Working with water and electrical components requires appropriate safety precautions and personal protective equipment.

Tradie Pro Tip

While you've got the old drain valve out, take a few extra minutes to give the entire drain pan a good scrub. It makes a big difference in preventing blockages for the new valve and keeps your cooler running cleaner for longer.

Pair With

Consider pairing this drain valve with replacement evaporative cooler filter pads and a new float valve to give your Bonaire unit a complete service and ensure optimal performance.

Go to full site