This Bonaire 2.0UF Square P2 Capacitor is a direct replacement part designed for Vulcan Wall Furnaces. It's crucial for getting your furnace's fan or motor spinning reliably, especially during those frosty Australian winter mornings. A failing capacitor is a common no-start call, and having the right spare on hand saves a lot of hassle on site.
Keeping your Bonaire wall furnace running smoothly means having the right components. This capacitor ensures your unit operates as the manufacturer intended, providing consistent warmth when it's needed most.
Best For
- HVAC technicians and service teams maintaining Bonaire Vulcan Wall Furnaces.
- Experienced DIY homeowners replacing faulty furnace capacitors.
- Apprentices learning about heating system component replacement.
Compatibility
This Bonaire 2.0UF SQ P2 Capacitor (PN: 0160190SP) is specifically designed for use with Bonaire Vulcan Wall Furnaces. If you're running a different model, check fittings and specs before ordering.
Features
- Genuine Bonaire Part: Ensures direct fitment and compatibility with original systems.
- 2.0UF Capacitance: Provides the correct electrical rating for efficient motor start-up.
- SQ P2 Designation: Matches the specific form factor required for Vulcan Wall Furnaces.
- Reliable Performance: Designed to restore furnace functionality and maintain performance standards.
Technical Specifications
| Specification | Detail |
|---|---|
| Type | Bonaire Square Capacitor |
| Capacitance | 2.0UF |
| Designation | SQ P2 |
| Bonaire Part Number | 0160190SP |
What's in the Box
- 1 x Bonaire 2.0UF Square P2 Capacitor (CT0160190SP)
Using It on the Job
- Always isolate power to the furnace at the main breaker and apply a lockout tagout. Confirm zero voltage with a multimeter.
- Discharge any existing capacitors using a properly insulated tool (e.g., screwdriver with insulated handle bridging terminals) to avoid a shock hazard.
- Carefully remove the old capacitor, noting wiring connections. Take a clear photo of the wiring setup before disconnecting.
- Install the new Bonaire 2.0UF Square P2 Capacitor, ensuring all connections are secure and correctly matched to the original wiring.
- Restore power to the furnace and test its operation, checking for proper fan start-up and overall function.
Limitations & Safety Notes
- Always disconnect and lock out power before handling electrical components to prevent injury.
- Capacitors can store a dangerous electrical charge even after power is off; always discharge them safely.
- Only for use with compatible Bonaire Vulcan Wall Furnaces as specified by the manufacturer.
- Ensure correct wiring based on the furnace's service manual to prevent damage or malfunction.
- Follow all relevant Australian electrical safety standards and Safe Work guidance.
Tradie Pro Tip
When replacing a capacitor, always check for signs of failure in the old unit like bulging or leaking. If the new one fails quickly, investigate the motor itself for excessive load or bearing issues to avoid repeat call-backs. It's often not just the cap.
Pair With
Pair with other Bonaire Heating Spares, a quality multimeter for diagnostics, or a range of hand tools for electrical work to complete your repair kit.