The Embraco Aspera NEU6210Z is a fully hermetic R134a HBP compressor that keeps reach-ins, merchandisers and beverage coolers ticking along with no dramas. It’s a tidy 220–240 V, 50 Hz unit with high starting torque (CSCR) so you’re off the ladder faster and back to the next job.
Key Features & Trade Benefits
- R134a HBP application — ideal for display fridges and reach-ins; reliable pull-down without overworking the system.
- High start torque (CSCR) — kicks over cleanly on tight heads and warm shops, reducing nuisance call-backs.
- Rated capacity ~1085 W at 5 °C evap / 50 °C cond — proven cooling where merchandisers actually run.
- Efficient at real-world temps — up to ~3.3 W/W at mid loads; helps keep energy costs in check.
- Factory oil charge (POE ISO 22, ~350 ml) — crack the drier, evacuate, charge, and you’re away.
- Compact “UNI” base — straightforward mounting with standard rubber feet; quick swap-outs.
- Serviceable tube stubs — 8.1 mm suction, 6.45 mm discharge/process for clean brazing.
Why This Product Matters
Real story: a sparky mate in Newcastle rang about a drinks merchandiser losing temp every arvo. We dropped in a NEU6210Z, pulled to sub-500 microns, weighed in the charge, and the cabinet was back at setpoint before smoko. Fair dinkum, that’s the difference a correctly sized HBP R134a can make on a hot day.
For broader refrigeration gear and spares, you can browse our Refrigeration collection for compatible tools and components that keep the whole system she’ll be right.
Pro Tip
Fit a fresh liquid line drier and pressure-test with nitrogen before evacuation. Log your vacuum with a micron gauge and isolate for a decay test. It’s a small step that saves a stack of call-backs on cap tube systems. No worries.
Compatibility & System Info
- Refrigerant: R134a
- Application: HBP (typical evap range −5 °C to +10 °C)
- Systems: Capillary tube or expansion valve; display fridges, reach-ins, merchandisers
- Electrical: 220–240 V, 50 Hz, single-phase (CSCR start)
Local note: In Sydney humidity and Brisbane heat, verify condenser cleanliness and airflow, and confirm fan direction after a swap to keep head pressure in the sweet spot.
What’s Included
- Embraco NEU6210Z hermetic compressor (factory-charged with ~350 ml POE ISO 22)
- Integrated overload protection
- CSCR start configuration (use specified start capacitor; verify box contents on delivery)
- Installation leaflet (where supplied)
Specifications
| Item | Spec |
|---|---|
| Model / Engineering code | NEU6210Z / 268HA92 |
| Power supply | 220–240 V, 50 Hz, 1-ph |
| Application | HBP (R134a) |
| Cooling capacity (rated) | ~1085 W @ +5 °C evap / +50 °C cond (EN12900) |
| Efficiency (rated) | ~2.38 W/W |
| Displacement | 12.11 cm³ |
| Motor type / start | CSCR (High start torque) |
| Start capacitor (typ.) | 64–77 µF / 330 V |
| Run current (RLA) | ~3.1 A (HBP, 50 Hz) |
| Locked-rotor amps (LRA) | ~18.5 A (50 Hz) |
| Oil / charge | POE (ester) ISO 22 / ~350 ml |
| Weight | ~10.5–11 kg |
| Suction stub | Ø 8.1 mm (slanted 42°) |
| Discharge / process stubs | Ø 6.45 mm |
| Base | UNI (standard mounting) |
Warranty & Returns
Backed by manufacturer warranty. HVAC Shop supports returns per our Shipping & Returns policy. Standard Australian consumer guarantees apply.
FAQs
Often yes if the duty matches. Check footprint (UNI base), tube sizes (8.1 mm suction, 6.45 mm discharge/process), and capacity at your design temps.
Yes. The NEU6210Z is CSCR. Use a 64–77 µF / 330 V start capacitor with the correct relay/overload per Embraco specs.
Factory-filled with POE ISO 22 (~350 ml). If you must add oil, use the same viscosity and type. Avoid mineral oil with R134a POE systems.
No. This model is specified for R134a HBP applications. Always follow Australian standards and the current refrigerant handling codes for safety and compliance.
Related Products
- Bradley NR1000 High-Pressure Nitrogen Regulator — pressure test and purge before every evac.
- Vacuum Pumps Collection — pick a pump that reliably hits sub-500 microns.
- Embraco NEU6215GK — nearby Embraco spec if you need a different duty.
- Hilmor Nitrogen Purge Tool — keep brazes oxide-free on cap tube systems.