Ferno Roofers Safety Kit & Height Safety

1 product

Working on roofs, plant decks and solar installs in Australia means serious fall risks. The Ferno Roofers Safety Kit brings together a full-body harness, rope lifeline, energy absorber, anchor sling and backpack in one package, so trained workers have a simple way to set up personal fall-arrest protection on routine roof work.

Height safety in Australia – where this kit fits

Any time there is a chance of falling from one level to another and being injured, PCBUs must manage that risk under Australian WHS laws. Codes of practice say you should first look at higher-level controls like eliminating the need to work at height, using solid work platforms, guardrails or scaffolds. Harness and lanyard systems are then used as part of a fall-arrest or restraint setup when those controls are not reasonably practicable.

When a harness kit is required, it must be suitable for the task and the worker, used in line with the manufacturer’s instructions, and selected, used and maintained in accordance with the relevant Australian and New Zealand standards for industrial fall-arrest systems.

Important: Falls from height are a leading cause of serious injury in construction and maintenance. Only use harness systems if you are trained and competent, or working under competent supervision. Always follow your site SWMS, fall-prevention plan and local regulator guidance.

What’s in the Ferno Roofers Safety Kit?

The Ferno Roofers Safety Kit – 17-HS-DLER-BP – is supplied by HVAC Shop under the SCE brand and is based on Ferno and Hi-Safe components. It includes:

  • Hi-Safe FH 50 full-body harness with adjustable leg, chest and shoulder straps, designed to spread load across the body in the event of a fall.
  • 15 m, 11 mm rope with sewn eyelet and steel screw gate karabiner to act as a temporary lifeline when correctly anchored.
  • Personal energy absorber with rope grab and screw gate karabiner so workers can move along the rope while keeping fall forces under control if something goes wrong.
  • 1500 mm round sling for connecting to a suitable structural anchor point as specified in your height-safety plan.
  • Backpack carry bag to keep the kit together and protected when travelling between jobs.

All components are built from durable materials and are intended to meet or exceed applicable industry safety standards when selected and used correctly.

Where the Ferno kit works best

Good use-cases

This style of roofers kit is typically used as part of a fall-arrest or fall-restraint setup for trained workers on:

  • Single-storey and low-rise roofs with suitable anchor options.
  • Rooftop split systems and packaged units located near edges or fragile surfaces.
  • Solar, antenna and skylight installs where workers operate within a defined safe reach.
  • Maintenance on parapet roofs and plant platforms with a risk of falling to a lower level.

When you need more than a kit

A harness kit on its own is not appropriate if you can reasonably install scaffold, edge protection or work platforms, or if there are other major risks like live traffic or crane operations. In these cases, regulators expect you to prioritise higher level controls and use harness kits as a backup or for specific tasks only.

Selecting and maintaining harness gear safely

1. Selection

Match the kit to the task and the worker. Short-duration roof access might suit a basic kit like this, while frequent or complex work may justify padded harnesses, twin-tail lanyards or engineered lifelines. Check harness sizing and adjust straps so the fit is secure but not restrictive.

2. Use and training

Workers should be trained and assessed competent in fitting harnesses, choosing anchors, setting up rope lines and using rope grabs and energy absorbers. Your system should be designed so that any fall distance is minimised and there is enough clearance to avoid hitting the ground or lower levels.

3. Inspection and maintenance

Before every use, check the harness, rope, lanyard, hardware, sling and backpack for cuts, abrasion, UV damage, chemical contamination, bent components and worn stitching. Schedule formal inspections at intervals specified by the manufacturer and your WHS procedures, often every few months for frequently used gear. Store the kit clean, dry and out of direct sunlight.

Height safety for HVAC, solar and roof AC work

For HVAC and solar jobs, the Ferno Roofers Safety Kit pairs well with hi-vis safety backpacks, collapsible traffic cones and other HVAC safety accessories. Together, they help you set up clear work zones on the ground and provide personal fall-arrest protection at height.

For more detailed guidance on roof access and cleaning rules, see HVAC Shop’s blog articles on height safety, roof AC cleaning and safety accessories for Australian tradies.

Related safety collections

Ferno Roofers Safety Kit FAQ

What is the Ferno Roofers Safety Kit used for?

It is a complete height-safety kit for trained workers operating on roofs and elevated areas. The kit includes a full-body harness, 15 m rope line, energy absorber with rope grab, round sling and backpack, giving you the core components of a personal fall-arrest system for roofing, solar and HVAC work.

Does this kit make me compliant with Australian height-safety laws?

No single product can guarantee compliance. The kit is designed to meet industry standards when used correctly, but overall compliance depends on your risk assessment, use of higher-level controls where reasonably practicable, and following Australian codes of practice and standards for fall prevention and fall-arrest systems.

Who is responsible for providing roof harness kits in Australia?

Under WHS law, the PCBU (person conducting a business or undertaking) must provide suitable PPE, including height-safety equipment where required, and ensure it is maintained and used correctly. Workers must use the PPE as instructed and take reasonable care for their own safety and the safety of others.

Do I still need scaffolds or guardrails if I use a Ferno harness kit?

Often yes. Harness systems are generally a lower-level control in the hierarchy of controls. If you can reasonably install scaffold, edge protection or work platforms, regulators expect you to do so and use personal fall-arrest as a backup or for specific tasks only.

Can homeowners use this kit for DIY roof work?

While homeowners can purchase harness kits, working at height without proper training and procedures is risky. In most cases, it is safer to engage licensed and insured roofers or HVAC technicians who are trained and equipped for height safety.

Author: HVAC content specialist

Reviewed by: Licensed refrigeration & air-conditioning technician (ARCtick licence details held on file)

Business details: HVACShop.com.au • ABN 98 351 143 900

Contact: hvacshop.com.au@gmail.com • 0412 333 115 (Mon–Fri 9:00am–5:00pm AEST)

Last updated: 2025-12-05T00:00:00+11:00

Go to full site