SpinTools F4000 Spin Flaring Set

Built for Aussie tradies who want faster, cleaner, leak-free flare joints—without the faff. The SpinTools F6000 SPIN Flaring Set is a 6-piece, drill-powered kit that makes perfect flares in seconds. Ideal for licensed HVAC & refrigeration techs, apprentices on installs, and contractors chasing speed, accuracy, and fewer call-backs. Too easy.

Key Features & Trade Benefits

• 6 common HVAC sizes: 1/4", 3/8", 1/2", 5/8", 3/4", 7/8" — covers mini-split and larger lines (one kit on the truck covers most jobs).
• Drill-powered in ~5 seconds: Heat-by-friction flares form fast and uniform (bang through installs and spend less time on each joint).
• High-pressure ready: Designed for leak-tight seating on systems using high-pressure refrigerants (confidence on R410A jobs).
• Long-life, reusable bits: Hardened alloy build with built-in depth stops (repeatable results and lower tool cost per job).
• Universal drill compatibility: Works with most drills at ≥1,800 RPM (no special driver needed).
• Soft copper ready (hard copper with pre-heat): Create flares with less cracking and cleaner faces (better sealing, fewer call-backs).

Why This Product Matters

On a 40-degree roof in Perth, the last thing you want is a stubborn flaring bar. Drill-powered SPIN bits take the grunt work out of flaring, so you get a consistent seat angle and smooth face that packs down properly when torqued. It’s a bloody good way to finish lines fast and move on to vacuum and charge. If you’re building out your kit, check our Flaring & Swaging Kits for more options that pair nicely with this set.

Pro Tip

Deburr inside and outside the tube, wipe the edge clean, then flare at max drill speed. Finish with a torque wrench to spec. Do that and, fair dinkum, you’ll cut leak rates and call-backs to almost nil.

Compatibility & System Info

• Refrigerants: Compatible with high-pressure refrigerants (e.g., R410A). Use standard 45° flare fittings per equipment spec.
• Tubing: Soft copper; hard copper can be flared with pre-heat. Also suitable for aluminium lines where specified.
• Drills: Corded or cordless rated at ≥1,800 RPM (18V+ cordless recommended). Rotary mode only—no impact.

Local conditions: From humid Brisbane installs to dusty Sydney high-rises, consistent, quick flares mean less fuss, fewer re-makes, and more jobs done—no worries.

What’s Included

• 6 x SPIN flaring bits: 1/4", 3/8", 1/2", 5/8", 3/4", 7/8"
• Durable carry case
• User instructions

Specifications

Warranty & Returns

Backed by a 12-month warranty. Returns accepted as per our standard returns policy (item must be unused and in original packaging). If anything’s not right, reach out—our team will sort it.

FAQs

Do I need to anneal or pre-heat hard copper?

For best results on hard copper, pre-heat the flare area before using the SPIN bit, then allow the flare to cool naturally before coupling.

What drill should I use?

A corded drill ≥1,800 RPM or an 18V+ cordless driver is ideal. Use rotary mode only (never impact). Keep the drill at max speed during the in-and-out motion.

How do I cut and prepare the tube to avoid leaks?

Use a quality tube cutter and deburr thoroughly. A quick once-over with a deburring tool removes burrs that can score the flare face. Consider a torque wrench to finish to spec.

Related Products

• Imperial TC1020SP Tube Cutter — Clean, square cuts make better flares and fewer leaks.
• Hilmor Deburring Tool — Smooth the ID/OD before flaring for a ripper seal.
• Refrigeration Torque Wrench Set — Finish to spec and cut call-backs.

Helpful Reading

New to flaring tools or training an apprentice? See our quick primer: Types of Flaring Tools.

Safety & Compliance

Handle and recover refrigerants in line with Australian rules and licensing. For current guidance on RAC equipment and refrigerants, see the Australian Government resources for the RAC industry.